Yamaha RX-V2500 Remote controlling Zone 2/Zone, To enable Zone mode on the remote control

ZONE 2/ZONE 3 (U.S.A., CANADA, U.K., EUROPE AND AUSTRALIA MODELS ONLY)

Using this unit’s internal amplifier

To use this unit’s internal amplifier, select “Internal” in Zone2 Amplifier 2 (page 66).

RL

+

–

PRESENCE/ ZONE 2

This unit

Second room

Remote controlling Zone 2/Zone 3

The supplied remote control can be used to control Zone 2/Zone 3. You can even select the input source and control components located in the main room directly from the second/third room regardless of the listening condition in the main room.

■To enable Zone mode on the remote

control

You will be able to switch the remote control mode from one room to another, and use the input selector, STANDBY, SYSTEM POWER, MUTE and VOLUME +/– to control the selected room.

1Set REC OUT/ZONE 2 on the front panel to

SOURCE/REMOTE.

	SOURCE/
	REMOTE
DVD	MD/TAPE
DTV	CD-R
CBL/SAT	TUNER
VCR 1	CD
DVR/
VCR2

REC OUT/ZONE 2

2Repeat steps 1 through 3 of the procedure in “Setting remote control codes” on page 70.

3Press l / h to select “L:AMP”.

ENTER

4Press ENTER.

“2000” appears in the display window.

5Enter the code number “2001” or “2003”.

For details, see page 71.

6Press ENTER to set the number.

“OK” appears in the display window if setting was successful.

7Press LEARN to complete the Zone setup.

The remote control will be able to operate this unit from Zone 2 or Zone 3.

LEARN

■To control Zone 2/Zone 3

1Press SELECT k repeatedly to display “ZONE 2” or “ZONE 3” in the display window.

SELECT

or

2Press SYSTEM POWER to turn Zone 2 or Zone 3 power on.

82