Yamaha RX-V2500 ZONE 2/ZONE, Zone 2/Zone 3 connections, Using external amplifiers, Notes

ZONE 2/ZONE 3

(U.S.A., CANADA, U.K., EUROPE AND AUSTRALIA MODELS ONLY)

This unit allows you to configure a multi-room audio system. The Zone 2 and Zone 3 features enable you to set this unit to reproduce separate input sources in the main room, second room (Zone 2) and third room (Zone 3). You can control this unit from the second or third room using the supplied remote control.

Only analog signals are sent to the second and third rooms. Any source you want to listen to in the second or third room must be connected using the analog (AUDIO L/R) input jacks on this unit.

Zone 2/Zone 3 connections

You need the following additional equipment to use the multi-room functions of this unit:

•An infrared signal receiver in the second and/or third room.

•An infrared emitter in the main room. This emitter transmits the infrared signals from the remote control in the second and/or third room to the main room (to a CD player or DVD player, for example).

•An amplifier and speakers for the second and/or third room.

•A video monitor for the second room.

OUT IN OUT IN CONTROL OUT

This unit

y

•Since there are many possible ways to connect and use this unit in a multi-room configuration, we recommend that you consult with your nearest authorized YAMAHA dealer or service center for the Zone 2/Zone 3 connections that best meet your requirements.

•Some YAMAHA models are able to connect directly to the CONTROL OUT jack on this unit. If you own these products, you may not need to use an infrared emitter. Up to six YAMAHA components can be connected as shown.

■System configuration and connections example

Using external amplifiers

To use an external amplifier in Zone 2, select “External” in Zone2 Amplifier (page 66).

ZONE 3 AUDIO OUT

ZONE 2 VIDEO OUT

ZONE 2 AUDIO OUT

	SP OUT
MONITOR OUT
DVD player	This unit
(or other component)	MAIN
VIDEO IN	SYSTEM ZONE 2
	ZONE 3
AUDIO IN
Infrared emitter
Main room

REMOTE OUT

Amplifier

Remote control

Infrared signal receiver

Second room

REMOTE 1 IN

Amplifier

Remote control

Infrared signal receiver

Third room

REMOTE 2 IN

OPERATION ADVANCED

Notes

•When not using the main room, turn down the volume of this unit in the main room. Adjust the Zone 2/Zone 3 volume by using the amplifier in the second/third room.

•To avoid unexpected noise, DO NOT USE the Zone 2/Zone 3 feature with CDs encoded in DTS.

English

81