Yamaha RX-V2500 owner manual After auto setup, Warning message, Cause, Remedy

AUTO SETUP

After auto setup

The following warning messages are displayed after analysis is complete to inform you of possible problems. We recommend that you check the contents of each message, then select Retry to try the auto setup procedure again.

Warning message	Cause	Remedy
W1:Out of Phase	Speaker polarity is incorrect. This message may	• Check the speaker connections.
	appear depending on the speakers even when
	they are connected correctly.
W2:Over Distance	The distance between the speaker and the	• Bring the speaker closer to the listening position.
	listening position is over 24 m (80 ft).
W3:Level Error	The difference in volume level between the	• Readjust the speaker installation.
	speakers is excessive. (No level correction is	• Check the speaker connections.
	made.)	• Use speakers of similar quality.
		• Adjust the output volume of the subwoofer.
W4:SP Mismatch	The speaker settings differ from the	• Check the speaker connections.
	measurement results of wiring (only occurs
	when the wiring measurement procedure is
	skipped).

PREPARATION

English

31