Yamaha RX-V2500 Multi Zone Multi zone, Surr.Initialize Surround initialize, Speaker B Speaker B

SYSTEM OPTIONS

■Multi Zone (Multi zone)

Use this feature to customize the Zone 2 and Zone B settings.

Manual Setup > Option > Multi Zone >

Display	Speaker B
Multi Zone	Zone2 Amplifier
Surr.Initialize	Zone2 Volume
Input Mode	Zone 3 Volume

Speaker B (Speaker B)

Use this feature to select the location of the front speakers connected to the SPEAKERS B terminals.

Choices: Main, ZoneB

•Select “Main” to turn on/off SPEAKERS A and B when the speakers connected to the SPEAKERS B terminals are set in the main room.

•Select “ZoneB” if the speakers connected to the SPEAKERS B terminals are set in another room. If SPEAKERS A is turned off and SPEAKERS B is turned on, all the speakers including the subwoofer in the main room are muted and the unit outputs sound from SPEAKERS B only.

Notes

•If you select “Zone B” and connect headphones to the PHONES jack on this unit, the sound is output from both the headphones and SPEAKERS B.

•When a DSP program is selected, the unit automatically enters the Virtual CINEMA DSP mode.

Zone2 Amplifier (Zone 2 amplifier)

Use to select how the ZONE 2 speakers are amplified. Choices: Internal, External, None

•Select “External” if you connect your Zone 2 speakers through an external amplifier connected to this unit’s ZONE 2 OUTPUT jacks.

•Select “Internal” to use this unit’s internal amplifier if you connect your Zone 2 speakers directly to this unit’s PRESENCE/ZONE 2 speaker terminals.

•Select “None” if you do not want to use the Zone2 feature.

Notes

•When “Internal” is selected, the presence speaker setting automatically switches to “None”.

•When “Internal” is selected, the Zone2 volume setting automatically switches to “Variable”.

Zone2 Volume (Zone 2 volume)

Use to select how the volume control will operate with regard to the ZONE 2 OUTPUT jacks. When Zone2 Amplifier is set to “Internal”, this feature is automatically set to “Variable”.

Choices: Fixed, Variable

•Select “Fixed” to fix the ZONE 2 OUTPUT volume level to a standard line level.

•Select “Variable” to adjust the ZONE 2 OUTPUT volume simultaneously using VOL +/– on the remote control.

Zone3 Volume (Zone 3 volume)

Use to select how the volume control will operate with regard to the ZONE 3 OUTPUT jacks.

Choices: Fixed, Variable

•Select “Fixed” to fix the ZONE 3 OUTPUT volume level to a standard line level.

•Select “Variable” to adjust the ZONE 3 OUTPUT volume simultaneously using VOL +/– on the remote control.

y

This menu item is also available in the front panel display system options menu (see page 85).

■Surr.Initialize (Surround initialize)

Use this feature to initialize the parameters for each sound field program within sound field program groups. When you initialize a sound field program group, all of the parameter values within that group revert to their initial settings.

Adjusted sound field parameter settings are displayed in blue.

Manual Setup > Option > Surr.Initialize Choices: STEREO, MUSIC, ENTERTAINMENT, MOVIE THEATER, SURROUND, All

Display	STEREO
Multi Zone	MUSIC
	ENTERTAINMENT
Surr.Initialize
	MOVIE THEATER
Input Mode	SURROUND
Memory Guard	All

•Press k / n to select the sound field program you want to initialize, then press ENTER.

•Select “All” to initialize settings for all sound field program parameters.

y

This menu item is also available in the front panel display system options menu (see page 85).

Note

Sound field program groups cannot be initialized when Memory Guard is set to “Guard” (see page 67).

66