Initial settings

Using AUTO SETUP (IntelliBeam)

Notes

• It is normal for loud test tones to be output during the AUTO SETUP procedure. Make sure that there are no children around in the listening room while the AUTO SETUP procedure is in progress.

• If there are curtains in your listening room, we recommend following the procedure below.

1 Open the curtains to improve sound reflection.

2 Run “BEAM OPTIMIZE ONLY” (☞p. 26).

3 Close the curtains.

4 Run “SOUND OPTIMIZE ONLY” (☞p. 26).

• Make sure that your listening room is as quiet as possible. For accurate measurement, turn off air conditioner or other devices that make noises.

ENTER

 

RETURN

1 Turn the unit and your TV on.

 

 

 

 

Switch TV input to display video input

 

 

2 from this unit (☞p. 21).

SYSTEM

 

Connect the IntelliBeam microphone to the

 

3 INTELLIBEAM MIC jack on the rear of the

MEMORY

 

 

 

unit.

IntelliBeam microphone

24 En