Setup menu

DISPLAY settings

DIMMER

Adjust the brightness of the front panel display. The smaller the value, the dimmer the display.

When the Eco function is enabled, the specified brightness is applied for only a few seconds.

Selectable item: -4 to -1, 0* (brightest)

OSD LANGUAGE 1)

Use to select the language used for menus displayed on the TV screen.

Selectable item: (Japanese), ENGLISH* (English), DEUTSCH (German), FRANÇAIS (French), ESPAÑOL (Spanish), ITALIANO (Italian), NEDERLANDS (Dutch), РУССКИЙ (Russian), SVENSKA (Swedish)

“ ”: Menus are displayed in Japanese. “ENGLISH”: Menus are displayed in English. “DEUTSCH”: Menus are displayed in German. “FRANÇAIS”: Menus are displayed in French. “ESPAÑOL”: Menus are displayed in Spanish. “ITALIANO”: Menus are displayed in Italian. “NEDERLANDS”: Menus are displayed in Dutch. “РУССКИЙ”: Menus are displayed in Russian. “SVENSKA”: Menus are displayed in Swedish.

DISTANCE UNIT

Use to change the display unit of measurement.

Selectable item: METERS, FEET*

If units used for displaying measurements are changed from “METERS” to “FEET” or vice versa, the change will not be reflected in current settings. Configure settings again to reflect the change in units.

INFORMATION settings

Display information for the audio and video signal input to this unit.

AUDIO

The following information on the current audio input signal is displayed.

Format

Digital audio format

 

 

Number of

The number of channels contained within the input

channels

signal—front/surround/low field effects (LFE).

 

Example: “3/2/0.1” means signal contains 3 front

 

channels, 2 surround channels, and LFE.

 

If the signal contains channels other than front,

 

surround, and LFE, the total number of channels

 

may be displayed. Example: “5.1ch”.

 

 

Sampling

The sampling frequency of the digital input signal

frequency

 

 

 

Bit rate2)

The per-second bit rate of the input signal

 

 

VIDEO

The following information on the current video input signal is displayed.

Type

HDMI or DVI

 

 

Resolution

Video signal resolution

 

 

SYSTEM

Display the version of firmware currently installed on this unit.

PREPARATION

PLAYBACK

SETTINGS

TROUBLESHOOTING

1) y

2) y

• Hold down the SETUP key to display “OSD LANGUAGE” directly

Audio bit rate may not be displayed for some input signals.

on the TV screen.

 

•The settings may be changed automatically when using the TV which supports the HDMI control function.

•Display language can only be selected for menus displayed on the TV screen. Only alphanumeric characters are displayed in the front panel display.

APPENDIX

65 En