Initial settings
| Operating the unit by TV’s remote |
| control (HDMI control) |
| What is the HDMI control function? |
HDMI1 | This unit can be operated using a TV's remote control if the TV |
| supports the HDMI control function and is connected to this unit |
| via HDMI cable (e.g. REGZA Link; some TVs excluded). |
| The following 6 functions are supported.1) |
| Remote control of TV (Example) |
| 1. Turn on/off |
| Both the TV and this unit turn on/off at |
| the same time. |
| 2. Switch input sources |
| • The input source for this unit switches |
| accordingly when the TV's input |
| source is switched. The input source |
| for this unit also switches when a |
| |
| input source from the TV's menu |
| display. |
| • The input source can be switched |
| while this unit is in standby mode. |
| 3. Control volume |
| This unit's volume can be adjusted when |
| |
| “AMP” (default). |
4. Switch the audio output device (TV or this unit)
5. HDMI signal
HDMI input signals are output from the HDMI OUT (ARC) jack. Video and audio content from an HDMI input source are output from the TV when this unit is in standby mode.
6. ARC function
Audio signals output from the HDMI (ARC) jack on the TV can be input to this unit.
First, try the operations described above with your TV’s remote control. If you are able to perform these operations, you may continue operating this unit with your TV’s remote control. If you are not able to perform these operations, configure HDMI control settings (☞p. 31).
With some TVs, the following additional functions can be controlled.
• Turning the UniVolume function on and off
• Navigating this unit’s setup menu displayed on the TV
• Operating the browse/playback screens for an iPod or USB device connected to the USB jack
1)y
•Even if your TV supports the HDMI control function, some functions may not be available. For details, refer to the manual supplied with your TV.
•If you connect this unit to a device such as a
•We suggest using devices (TV,