Initial settings
SYSTEM
MEMORY
Saving this unit’s settings to system memory
Three sets of settings can be saved to this unit's memory, enabling quick loading of settings optimized for specific listeners or environmental changes as needed. Refer to the examples below to save IntelliBeam measurement results and settings such as surround setting to system memory, or to load a
The following settings can be saved to system memory.
•Surround playback (☞p. 33), stereo playback (☞p. 33), or target playback mode (☞p. 33)
(The sound beam output method (☞p. 36) can also be saved for surround playback mode.)
•IntelliBeam measurement results (☞p. 23)
(When “HORIZONTAL ANGLE”, “BEAM TRAVEL LENGTH”, “FOCAL LENGTH”, and “IMAGE LOCATION” are configured in the setup menu (☞p. 58), these settings are applied to IntelliBeam’s AUTO SETUP measurements.)
•Surround: CINEMA DSP (☞p. 34), surround decoder (☞p. 38)
•Channel level (☞p. 33, 62)
Example 1 Saving the IntelliBeam measurements for different environments to system memory
If materials that absorb sound, such as curtains, obstruct sound beams, the effectiveness of those beams decreases. Measure with the curtains open and again with them closed. Save both sets of settings to system memory 1 and 2, and load the appropriate settings as needed.
Example 2 Saving frequently used settings to system memory
SYSTEM MEMORY 1: Surround setting
SYSTEM MEMORY 2: A target playback mode setting that projects sound beams toward the kitchen
SYSTEM MEMORY 3: A target playback mode setting that projects sound beams toward the living room
Example 3 Saving preferred listener settings to system memory
SYSTEM MEMORY 1: Settings configured for Dad
SYSTEM MEMORY 2: Settings configured for Mom
SYSTEM MEMORY 3: Settings configured for parties