Setup menu
Example |
|
Front left channel | Center channel |
With positive focal | With negative focal |
lengths | lengths |
2 Adjust the image location for the front right channel (RIGHT).
The higher the percentage, the louder the output from the center channel.
Control range: 0%* to 95%
With the front right | |
unnatural | channel adjusted |
PREPARATION
IMAGE LOCATION
If sound from the left and right channels is unnatural, first adjust the volume of each channel (☞p. 33, 62).
If this does not resolve the problem, adjust left- and
Use to adjust the direction from which the front left and right channel sound is heard so that each sound can be heard closer to the center channel.
Use this feature to redirect audio signals if the sound coming from the front left and right channels seems unnatural.
You can adjust this parameter only when “5Beam/Plus2”, “5Beam” or “3Beam” is selected in “Changing the audio output method for surround playback” (☞p. 36).
Sub menu: ADJUSTMENT
Select “ON” to configure the sound direction.
Selectable item: OFF*, ON
1 Adjust the image location for the front left channel (LEFT).
The higher the percentage, the louder the output from the center channel.
Control range: 0%* to 95%
| With the front left | |
unnatural |
| channel adjusted |
|
|
|
|
|
|
CHANNEL OUT
Sub menu: 5.1ch, 7.1ch, AUTO*
Specify the sound beam output method (5.1ch, 7.1ch, AUTO). When “AUTO” is selected, sound beams are output from the appropriate number of channels based on input signal as follows.
-2- or
-6.1- or
The available sound beam output methods vary depending upon the current “CHANNEL OUT” setting (☞p. 36).
PLAYBACK
SETTINGS
TROUBLESHOOTING
APPENDIX