Initial settings
Saving settings to system memory
1 Hold down the SYSTEM MEMORY 1, 2, or 3 key until “M1 Save?”, “M2 Save?”, or “M3 Save?”, corresponding to the button pressed, is displayed.
2 Press the same SYSTEM MEMORY key again.1)
When the SYSTEM MEMORY 1 key is pressed, “M1 Saving” is displayed, and settings are saved.
Loading settings
1 Press the SYSTEM MEMORY 1, 2, or 3 key corresponding to settings to be loaded.
If the SYSTEM MEMORY 1 key is pressed, “M1 Load?” will be displayed.
2 Pressagain.the same SYSTEM MEMORY key
When the SYSTEM MEMORY 1 key is pressed, “M1 Loading” is displayed, and settings are loaded.
PREPARATION
PLAYBACK
SETTINGS
TROUBLESHOOTING
1)y
•If system settings are already stored in the selected memory number, this unit overwrites the old settings.
•The memory function cannot be set when “MEMORY PROTECT” is set to “ON” in the advanced setup menu (☞p. 66).
APPENDIX