Setup menu
| SOUND settings |
BEAM | SPEAKER LEVEL |
| Adjust the volume of each channel to balance output levels. Use |
| test sounds output from each channel to adjust volume for |
AUX | optimal balance.1) |
TV | Sub menu: Front L, Front R, Center, Surround L, |
| |
| Surround R, Subwoofer |
| Adjustable range: |
Adaptive DRC 2)
Adjust this unit’s volume and dynamic range3) for optimal balance. When “ON” is selected, dynamic range is adjusted as follows for optimal listening at low volumes, such as might be used at night.
When the volume level is low:
Narrow the dynamic range. Loud sound is played back softer, and soft sound which is hard to be listened to is played back louder. When the volume level is high:
Widen the dynamic range. For both soft and loud sounds, source sound is played back without adjusting volume.
Output level
On
Off
Input level
Volume: low
Output level
On
Off
Input level
Volume: high
Selectable item: ON*, OFF
“ON”: Adjust the dynamic range automatically.
“OFF”: The dynamic range is not adjusted automatically.
1)y
When the sound beam output method is set to “MY SUR.” (My Surround) with the BEAM key, the following items can be configured. Sub menu: Center, Surround L/R, Subwoofer
2)y
•When set to “ON”, “DYNAMIC RANGE” is automatically set to “Max”.
•This setting is not available when the UniVolume function is enabled.