PREPARATION

Controls and functions

Center unit front panel (front, top)

8 9 0

YSP-CU4300

1 2 3

4

5 67

8 9 0

YSP-CU3300

PREPARATION

PLAYBACK

1 2 3

4 6 7

1Remote control sensor

Receives infrared signals from the remote control (☞p. 9).

2Remote control sensor of a TV

Receives infrared signals from the TV remote control when the TV Remote Repeater function is enabled (☞p. 12).

3Wireless module

Receives and sends wireless signals. Do not place metal objects in front of the wireless module as they may interfere with the wireless module’s ability to receive and send wireless signals.

4Front panel display

Shows information about the operational status of this unit (☞p. 8).

5USB jack (YSP-4300 only)

Enables connection of a USB device (☞p. 48, 54).

6SURROUND indicator

Lights up according to the input signal.

Displayed

Input signal

color

 

 

 

Blue

Following surround audio signal formats:

 

Dolby TrueHD, Dolby Digital Plus, DTS-HD

 

Master Audio, DTS-HD High Resolution,

 

Multi-channel Linear PCM

 

 

Orange

Surround audio signal other than above

 

 

Off

Stereo/monaural audio signal or no signal

 

 

7STATUS indicator

Lights up when the power is turned on, and goes off in the standby mode.

8INPUT key

Selects the playback component (☞p. 32).

9VOLUME (+/-) key

Adjusts the volume of the unit (☞p. 32).

0 key

Turns on the unit or set it to the standby mode.

Note

In the standby mode, this unit consumes a small amount of power in order to search for HDMI signals or to receive infrared signals from the remote control.

SETTINGS

TROUBLESHOOTING

APPENDIX

5 En