Repeat these steps to display the desired menu.
SETUP MENU
BEAMIntelliBeam
SOUND HORIZONTAL ANGLE
HDMIBEAM TRAVEL LENGTH
yAiredFOCAL LENGTH
DISPLAY IMAGE LOCATION INFORMATION CHANNEL OUT
3 Press the S/T key to change the setting value of each menu.3)
4 Press the SETUP key again to exit the setup menu.
Press the W key4) to return to the previous menu.
Press the SETUP key.1)
SETUP MENU
BEAMIntelliBeam
SOUND HORIZONTAL ANGLE
HDMIBEAM TRAVEL LENGTH
yAiredFOCAL LENGTH
DISPLAY IMAGE LOCATION INFORMATION CHANNEL OUT
Press the S/T key to select a menu and then press the X key.2)
SETTINGS
Setup menu
/
SETUP
A variety of settings for this unit can be specified and adjusted from the setup menu. Among the options available are the sound beam output method for optimal surround sound effects, speaker volume control, and HDMI settings.
•The setup menu is displayed on, and operated from, the TV screen (it cannot be displayed in the front panel display). See “Displaying the menu screen on the TV” (☞p. 21) for instructions on displaying the setup menu on the TV.
Setting the setup menu
1
ENTER
RETURN
2
1) 
Note
Hold down the SETUP key to display “OSD LANGUAGE” directly on the screen (☞p. 22, 65).
2)y
The ENTER key performs the same function as the X key.
3)y
The default settings are marked with “*”.
4)y
The RETURN key performs the same function as the W key.