Setup menu

DYNAMIC RANGE 3)

Adjust this unit’s dynamic range.

Selectable items: Max*, Standard, Min/Auto

Max: Outputs sound without adjusting the dynamic range of the input signals.4)

Standard: The dynamic range recommended for regular home use.

Min/Auto:

Min: Sets dynamic range at a level that supports comfortable listening at low volumes.

Auto: Sets dynamic range in accordance with information received from input signal.

HDMI setup

Use to configure the settings related to HDMI signals and the HDMI control function.

HDMI CONTROL

Turn HDMI control (☞p. 30) on or off.

Selectable item: OFF*, ON

“OFF”: Disable the control function. The standby power consumption of this unit decreases.

“ON”: Enable the control function.

PREPARATION

Dolby PLIIx PARAMETER

Adjust Dolby Pro Logic IIx Music surround decoder parameters.

Sub menu: Center Width

The greater the value, the broader the sound to the left and right. Smaller values restrict sound to the center.

Adjustable range: 0 to 7 (default: 3)

Sub menu: Panorama

When this is set to “ON”, sounds from the front left and right channels are routed to the left and right for a surround, panoramic effect.

Selectable item: OFF*, ON

Sub menu: Dimension

This setting adjusts the difference in levels between the front and surround channels. The greater the value, the higher the volume from the front channel. The smaller the value, the higher the volume from the surround channels.

Adjustable range: -3 to +3 (default: 0)

HDMI AUDIO OUT

Use to select a component to play back HDMI audio signals. This setting is effective when “HDMI CONTROL” is set to “OFF”.5)

Selectable item: AMP*, TV

“AMP”: Play back the input sound signal.

“TV”: Plays audio content from the TV connected to the HDMI OUT (ARC) jack.

TV INPUT

If your TV is not ARC compatible (or if the ARC feature has been disabled), TV audio is input via the INPUT DIGITAL TV (OPTICAL) jack (default). This unit's input source can be changed to the AUX INPUT DIGITAL (COAXIAL) jack.6)

Selectable item: OPTICAL*, COAXIAL

PLAYBACK

SETTINGS

TROUBLESHOOTING

3)y

Dynamic range describes the difference between minimum and maximum volume.

4)y

“Adaptive DRC” is automatically set to “OFF” when the settings other than “Max” is selected.

5)y

HDMI video signals input to one of the HDMI IN jacks of this unit are always output from the HDMI OUT (ARC) jack of this unit.

6)y

If this unit’s input source is switched to “COAXIAL”, audio is input from the device (TV) connected to the AUX INPUT DIGITAL jack on this unit when the TV key is pressed. Audio is input from the device connected to the INPUT DIGITAL TV jack on this unit when the AUX key is pressed.

APPENDIX

63 En