26Installation External PSII
This is an example of a PSII configuration label. The numbers identify the settings you need to know. The table following the illustration provides a description of each number.
Figure 3 • PSII Configuration Label
1
2
3
1This shows the IP address, subnet mask, and default gateway of the PSII device. If the IP address is set at 0.0.0.0, you need the serial number (in number 3) to set the IP address.
2This shows all the Novell settings.
3This shows the serial number, hardware address (MAC address), and firmware version of the PSII device.
ZebraNet PrintServer II User Guide | 04/21/2009 |