52Getting Started Setting Alerts

Setting Alerts

It is important to understand the relationship between the PSII and the printer when you are establishing alerts. Here are the relationships you need to be aware of:

•Non-ZebraLink-enabled printers — can send alerts on only a specific set of printer errors that are reported in the IEEE 1284 protocol.

•ZebraLink-enabled printers — ZebraLink allows for the printer to send alerts not in the IEEE 1284 protocol.

ZebraNet View

In this section are step-by-steps instructions on how to set up an alert using ZebraNet View. For information on setting up alerts using ZebraLink, see ZebraLink on page 54.

To set alerts (traps) using ZebraNet View, complete these steps:

1.In the ZebraNet View dialog, from the menu bar select Print Server>Configuration.

2.Click the SNMP Traps tab.

The Printer Traps check boxes are the alerts you can set from ZebraNet View.

3.Enable the alerts (printer traps) you want to set here and click OK.

45537L-005

ZebraNet PrintServer II User Guide

04/21/2009