Printing Configurations 75
System V Queue Installation
System V Queue Installation
Configuring Operating System V Queue for ZebraNet Printing
This section describes the configuration of the printing system on the UNIX operating system. For clarity and brevity, the following specific names are used to represent general devices or concepts.
lj4 — The local queue name on the UNIX system to which you want PSII print jobs directed.
ZEBRAPRINTER — The host name or IP address of the remote system that is the PSII device. For example, to Telnet to the PSII and invoke the PSII configuration utility, you would enter:
Telnet ZEBRAPRINTER
A host name is not required for the PSII — the IP address can be used.
yourqueuename — This is the name of the queue on the ZebraNet and must end with LF1.
Prerequisites
Before you proceed, the following prerequisites must be met:
•The name ZEBRAPRINTER and the IP address assigned to the PSII are in the /etc/hosts file on the UNIX system.
•The LPD must be running on the UNIX system.
UNIX Configuration
To configure the UNIX machine so users can spool print jobs to the PCL print queue on the ZebraNet named ZEBRAPRINTER, complete these steps:
1.Log in to the UNIX machine as root.
2.Type:
lpsystem
3.Type:
lpadmin
4.Type: accept lj4
5.Type: enable lj4
6.Try printing by typing the command: lp
04/21/2009 | ZebraNet PrintServer II User Guide |