44Getting Started Before You Begin
Before You Begin
PSII offers many features, but how you access and work with them is dependent on your environment. Before you begin, you need to get information from the PSII configuration label.
Important • Make sure the printer is turned off (O).
To print a PSII configuration label, complete these steps:
1.Turn on (l) the printer and let it complete its
2.Let the PSII complete its POST cycle.
3.When the above steps are complete, press Test and hold it in for a few seconds before you release it.
•On the Z4Mplus and Z6Mplus, the Test button for the internal PSII device is a small button on the back of the printer located under the
•On any other printer, the Test button on the PSII device is a small hole. For more details, see Figure 4 on page 27.
A PSII configuration label prints. Your configuration label looks similar to Figure 13 on page 45.
ZebraNet PrintServer II User Guide | 04/21/2009 |