Getting Started 47
Assigning an IP Address
To assign an IP address using ZebraNet View, complete these steps:
1.From the task bar, select Start>Programs>ZebraNet Utilities>ZebraNet View.
Important • On the illustration that follows, take note of the H/W address column and Serial # column. Compare what you see in ZebraNet View with the configuration label you printed out.
The ZebraNet View dialog opens:
2.Compare the H/W Address or Serial Number on the PSII configuration label with the H/W Address column on the screen to find the PSII you are working with.
3.When you locate your PSII, select it.
4.From the menu bar, select PrintServer>Configuration.
Important • If the PSII does not have an IP address, it shows in the main screen with an IP of 0.0.0.0. If, after 2 minutes, you do not assign an IP Address, the PSII defaults to IP Address 192.168.254.254 or 198.102.102.254 (this depends on your firmware version).
5.If your PSII does not have an IP address, complete these steps:
•Find your PSII and
•In the small dialog that opens, enter an IP Address, click OK.
•The ZebraNet View dialog opens.
04/21/2009 | ZebraNet PrintServer II User Guide |