Installation 33
Internal PSII
6.See Figure 9. To remove the electronics cover, push in and pull up.
Figure 9 • Z4Mplus Electronics Cover
1
2
3
1Cover plate screws (2)
2Printer back
3Cover plate
7.From the back of the printer, use a
This opens the mounting slot on the back of the printer.
8.See Figure 10. To disconnect the PSII, unplug the cable connector from the I/O board. You will have the I/O board separate from the PSII board (and the cable connected to it).
04/21/2009 | ZebraNet PrintServer II User Guide |