24Installation External PSII
External PSII
This section provides you with an illustration of the external PSII and the steps required for its installation.
This illustration shows an external PSII with the important components identified.
Figure 1 • External PSII
1
4 
2
3
1Parallel connector
2Test button
3Status indicator
4Ethernet connector
Note • When necessary, refer back to this illustration during the installation steps.
To install an external PS II, complete these steps:
1.Turn off (O) the printer.
2.See Figure 2. From the back of the printer, insert the PSII device into the parallel port. Figure 2 shows the location and an enlarged view of the parallel port.
ZebraNet PrintServer II User Guide | 04/21/2009 |