72Getting Started Defaulting the PSII
Test Button
To default the PSII to factory settings using the Test button, complete these steps:
1.The printer is turned off (O).
The Test button is a small hole on the bottom of the external PSII device. To press the Test button, you need to insert something small into the hole, like a paperclip.
2.With the printer turned off, press and hold the Test button on the PSII device and turn on the printer.
3.The status indicator tells you when PSII has been reset to factory defaults, as follows:
•If an active network cable is connected to the PSII, the status indicator turns solid green. When this happens, you can release the Test button.
•If there is not an active network cable connected to the PSII, the status indicator flashes green. When this happens, you can release the Test button.
•For more details on status indicators, see Status Indicator on page 130.
ZebraNet PrintServer II User Guide | 04/21/2009 |