NOTE: If print quality has not improved after performing this procedure, try cleaning the printhead with Save-a-Printhead cleaning film. This specially coated material removes contamination buildup without damaging the printhead. Call your authorized Zebra reseller for more information.

Printhead assembly

Take label

sensor

Transmissive

sensor

Ribbon sensor

Platen roller

Reflective sensor

Figure 23

Cleaning the Sensors

Brush or vacuum any accumulated paper lint and dust away from the printer sensors. Refer to Figure 23. The reflective sensor, transmissive sensor, and ribbon sensor should be cleaned on a regular basis to ensure proper operation of the printer. For printers with the value peel-off, power peel-off, and/or power rewind option(s) installed, clean the take label sensor.

H-974

PAGE 43 OF 57

0808 IH-974