Adjusting the Reflective Sensor

Refer to Figure 7.

1.Open the printhead assembly by pressing the printhead open lever.

2.Locate the reflective sensor positioning lever.

3.Move the reflective sensor positioning lever across the width of the media until the reflective sensor aligns with the start-of-label indicator. The glow of the red light will assist in the proper placement of the reflective sensor.

4.Close the printhead assembly.

Printhead assembly

Reflective

sensor

 

Reflective

 

sensor

 

positioning

Printhead open

lever

 

lever

 

Figure 7

H-974

PAGE 6 OF 57

0808 IH-974