Pressure adjustment dials

Figure 27

Power Rewind Media Alignment

(Power rewind option required.)

NOTE: Under normal operating conditions, media alignment should not be necessary if the media/backing was initially installed tightly against the backplate of the take-up spindle.

Perform the following adjustment if the media does not track properly onto the take-up spindle.

Refer to Figure 28.

1.With media and backing material loaded, open the printhead assembly.

2.Turn the adjustment dial clockwise to align the media/backing material more to the right. (The image will move to the left.)

or

Turn the dial counterclockwise to align the media/backing material more to the left. (The image will move to the right.)

3.Manually rotate the take-up spindle and ensure the media/backing tracks properly.

4.Close the printhead assembly.

H-974

PAGE 49 OF 57

0808 IH-974