Cleaning the Value Peel-Off Module

(Value peel-off option required)

Perform the following procedure if adhesive buildup begins to affect peel-off performance.

Refer to Figure 25.

1.Open the printhead assembly.

2.Open the pivot bracket assembly by pivoting the module toward you.

3.Use a swab soaked with the Zebra-recommended solvent to remove adhesive from the tear-off/peel-off bar.

4.Manually rotate the pinch roller and clean thoroughly with solvent and a swab.

5.Close the pivot bracket assembly.

6.Close the printhead assembly.

Printhead

assembly

Tear-off/ peel-off

bar

Pinch

roller

Pivot

bracket

assembly

Figure 25

H-974

PAGE 45 OF 57

0808 IH-974