Printhead assembly

Take-up spindle

Adjustment

dial

Figure 28

Fuse Replacement

A user-replaceable AC power fuse is located just below the AC power switch at the rear of the printer. The replacement fuse is a 3AG fast blow style rated at

5 Amp/250 VAC.

Before replacing the fuse, turn off the AC power switch and unplug the AC power cord.

To replace the fuse, insert the tip of a flat blade screwdriver into the slot in the end of the fuse holder end cap. Press in slightly on the end cap and turn the screwdriver slightly counterclockwise. This will disengage the end cap from the fuse holder and permit removal of the fuse.

To install a new fuse, reverse the sequence.

H-974

PAGE 50 OF 57

0808 IH-974