Command Prefix, Label Prefix | Zebra Technologies SL5000r/T5000r

Chapter 1 PPI/ZGL SETUP Menu

Command Prefix

This item allows you to select the prefix for the control instructions command.

The range is 1-255, and the default is 126.

Label Prefix

This item allows you to select the prefix for the format instructions command.

The range is 1-255, and the default is 94.

Delimiter

This item allows you to select the delimiter used to separate the parameter of a command.

The range is 1-255, and the default is 44.

LP+ Text Mode

PPI supports text printing using the LP+ emulation.

•Absorb (default). Use this setting for ZPL compatibility. This setting absorbs non-PPI data.

•Auto Pass-thru. Use this setting for text printing. Non-PPI data is passed to the LP+ emulation.

•ZGL Quiet. All data and PPI commands are passed to the LP+ emulation.

Preparser Command

The incoming data will be checked for the string “HS” or “JA” prior to entering the ZGL emulation parser based on the HS Command or the JA Command. Once the string is detected, the command will take effect immediately.

The default is HS Command.

Preparser Port

•Disable (default). Disables the Preparser Command feature.

•Parallel. Select Parallel if the data is coming to the printer through the parallel port.

•Serial. Select Serial if the data is coming to the printer through the serial port.

12

Image 12

Zebra Technologies SL5000r/T5000r manual Command Prefix, Label Prefix, Delimiter, LP+ Text Mode, Preparser Command

Contents

Printer Protocol Interpreter PPI ZGL Page Page Trademark Acknowledgments Table of Contents Table of Contents Command Enhancements And Differences ZGL-DBCS Introduction About This Manual PPI/ZGL Setup Menu PPI/ZGL Setup PPI/ZGL Setup Submenus ZPL Compatible Command Prefix LP+ Text ModePreparser Command Label Prefix MC Label Fmt PQ Label FmtLabel Buf Size Host Form Length Resolution Mode Vertical AdjustLeft Position Top Position FB Width Adjust Is Label Format Character Group And Character Sets ZGL Fully Supported Commands Bx Barcodes By Barcode Defaults CF Change Alphanumeric Default Font~CC / CC Change Caret ~CD / CD Change Delimiter ~EF / EF Erase Format ~EG / EG Erase Downloaded ImagesFA Field Allocate FC Field Clock GS Graphic Symbol FT Field Type SetFW Field Orientation FX Comment ~JA Cancel All HY Upload GraphicIL Image Load IM Image Move MM Print Mode MU Mode UnitsLL Label Length LR Label Reverse TA Tear Off Adjust ~NT Set Currently Connected Printer TransparentPM Print Mirror Image of Label PW Print Width XF Recall Format XG Recall GraphicXZ Label End @ Select Font by Name Ax Select Alphanumeric Font$x Barcodes $B Upcship CI Select International Set $D FIM MS DOS CP710 CP 858 Euro CW Font Identifier ~DB Download Bitmap Font ~DG Download Graphics ~DY Download GraphicFB Field Block FV Field Variable Data $E Switch Emulation ~JD / JE Disable/Enable DiagnosticsHR Calibrate Rfid Transponder Position ~HS Host Status Return JE Disable Diagnostics ~JP Pause & CancelJU Configuration Update JV Configuration Update MC Mp Clear MD Media DarknessMN Media tracking PF Slew Dot Rows RM Enable Rfid Motion RS Rfid Setup~PP / PP Programmable Pause ~PR / PP Print Rate RZ Set Rfid Tag Password ~WC Print ConfigurationAutoexec Bootup File ~SD Set Darkness ZGL Menu Conversions Appendix a Pwr Up Auto-Cal Disable*, Enable Validator Menu Opt Format Convert None*, 150-300 PPI/ZGL Setup Menu Default Gateway opt -Sets Gateway Ethernet Address Menu, opt ZGL-DBCS Overview Select Alphanumeric Font Command ZGL-DBCS Series Select International Set Command Orit Font Identifier Command Printronix Customer Support Center Printronix Supplies Department Corporate Offices Page 174779-001