Zebra Technologies SL5000r/T5000r manual ZGL Menu Conversions

A ZGL Menu Conversions

When substituting a Zebra Xi III model printer with a SL5000r/T5000r printer, refer to the ZGL conversion table below.

Table 2: ZGL Menu

Zebra Xi lll Series	SL5000r/T5000r with ZGL Emulation
Darkness - (0 to +30) +10*. Darkness of	QUICK SETUP Menu,
image on label.	Print Intensity - (-15 to +15) -3*
Tear Off - (-120 to +120) +0*. Adjusts Tear	QUICK SETUP Menu,
Off, Peel-Off and Cut position in Dot Rows.	Paper Feed Shift - (-0.50 to+12.8) 0.00 Inch*. Adjusts
	Tear Off, Tear-Off Strip, Peel-Off & Cut position in Inches
	or MM.
Print Mode –	QUICK SETUP Menu,
	Media Handling -
Rewind	Continuous (same as Zebra Rewind)
Tear-Off	Tear-Off Strip* (same as Zebra Tear-Off)
Peel-Off	Peel-Off(same as Zebra Peel-Off)
Cutter	Cut (same as Zebra Cutter)
	Tear-Off(similar to Zebra Peel-Off)
Applicator	N/A Applicator N/A on SL5000r/T5000r
Media Type - Continuous*, Non-Continu-	QUICK SETUP Menu,
ous.	Gap/Mark Sensor-
	Disable*- Same as Zebra Continuous Media Type (no
	label length indicators).
	Non-Continuous N/A. Assumed when Gap, Adv Gap or
Sensor Type -	Adv Notch selected.
Web - Liner gap, notch or hole. NOTE: Media	NOTE: Use Gap, Adv Gap or Adv Notch for Zebra Web.
Type must = Non-Continuous.	NOTE: No Media Type setting is available or required.
	Gap - Liner gap, notch or hole.
	Adv Gap - Use w/dark background labels
	Adv Notch - Use with dark background labels.
	Mark - Black mark on underside of label. No Media Type
	setting avail. or required.
Mark - Black mark on underside of label
(Media Type must = Non-Continuous).
Print Method –	QUICK SETUP Menu,
Transfer*- Use of ribbon.	Print Mode - Transfer* or Direct.
Direct - No ribbon used.

37