Zebra Technologies SL5000r/T5000r manual ZGL-DBCS Series, Select Alphanumeric Font Command

Appendix B ZGL-DBCS Series

ZGL-DBCS Series

The ZGL-DBCS series include ZGL-Hangul, ZGL-HanziGB, and ZGL-JAP emulation software.

High Byte Menu

The menu selection “HIGH BYTE” on the Front Panel under MENU MODE -> PGL/ZGL SETUP turns the most significant bit on or off.

When “HIGH BYTE” is set to “Disable”, the most significant bit will be turned off and the code point exceeding 0x7F will be skipped. For example, the input code point “0x3061” will be mapped to “0xB0E1” automatically. If the input code point is “0xB0E1”, it will be skipped.

When “HIGH BYTE” is set to “Enable”, and the leading byte of data exceeds 0x7F, it will be combined with the following byte to form a two-byte code point. On the other hand, if the first byte is less than 0x80, it will be treated as a single-byte code point for printing.

The default settings for the High Byte Menu are:

•ZGL HanziGB - DISABLE

•ZGL Hangul - ENABLE

•ZGL JAP - ENABLE

Command Syntax

The double-byte characters can only be printed if both the ^A<DBCS font identifier> command and the ^CI14 or ^CI15 or ^CI22 commands are received. The ^CI14, ^CI15, and ^CI22 commands can work on all ZGL-DBCS emulations to select the DBCS character set. The order in which the ^CI and ^A commands are received is not important.

(A) Select Alphanumeric Font Command

Purpose	Allows you to select the alphanumeric font, orientation, and
	magnification.
	When the DBCS character set is selected and if the font_id is
	mapped to a DBCS font, the (A) command can be used to
	magnify and orientate the double-byte characters. The default
	DBCS font identifier is “1” for all DBCS-ZGL builds.
Format	^ Afont_id {orit}, height, width
^A	Selects the Alphanumeric Font command.
font_id	Selects the font choice from:

A through H - non-proportional (Default) 0 - scalable

Acceptable value: A-Z and 0-9

44