Chapter 3
^B$B - UPCSHIP
Command Format: ^B$B fp, hgt, rdt, pos
b:UPCSHIP barcode command fp: Barcode orientation
N = No Rotation (Default)
R = Rotate 90 degrees, clockwise I = Rotate 180 degrees, inverted
B = Rotate 90 degrees,
Value entered in dots at the printer dpi.
The default is 10 dots or the height set by the ^BY command. If the height exceeds the label length, then the barcode is cut off at the bottom of the label.
rdt: Human readable data
Y = Print human readable data (Default) N = No human readable data
pos: Human readable data print position Y = Print it above the barcode
N = Print it below the barcode (Default)
^B$C - EAN/UCC-128
Command Format: ^B$C fp, hgt, rdt, pos, chk
c:
N = No Rotation (Default)
R = Rotate 90 degrees, clockwise I = Rotate 180 degrees, inverted
B = Rotate 90 degrees,
Value entered in dots at the printer dpi.
The default is 10 dots or the height set by the ^BY command. If the height exceeds the label length, then the barcode
is cut off at the bottom of the label. rdt: Human readable data
Y = Print human readable data (Default) N = No human readable data
pos: Human readable data print position Y = Print it above the barcode
N = Print it below the barcode (Default) chk:
Y = Calculate and print check digit N = No check digit (Default)
26
