ZyXEL Communications 100IH manual Menu 2 Isdn Setup for 1TR6 10 Menu 2 Isdn Setup

Prestige 100 and 100IH ISDN Router and Router/Hub

Menu 2 - ISDN Setup

Switch Type: 1TR6

B Channel Usage= Switch/Switch

ISDN Data		=
A/B	Adapter 1	=
A/B	Adapter 2	=

PABX Outside Line Prefix =

Outgoing Calling party Number =

Incoming Phone Number Matching= Endgeraete Auswahl Ziffer (EAZ)

Analog Call Routing= N/A

Press ENTER to Confirm or ESC to Cancel:

Press Space Bar to Toggle.

Figure 2-13 Menu 2 – ISDN Setup for 1TR6

Table 2-10 Menu 2 – ISDN Setup

Switch Type	This field is fixed as DSS1or 1TR6.
B Channel Usage	In general, this is Switch/Switch. If you are only using one B channel
	(e.g., your Prestige is sharing the ISDN BRI line with another device
	on the S/T bus), then select Switch/Unused. The default is
	Switch/Switch. The options for this field are:
	♦	Switch/Switch	♦	Leased/Unused ♦ Switch/Unused
	♦	Switch/Lease	♦	Unused/Leased
	♦	Leased/Switch	♦	Leased/Leased
ISDN Data &	Enter the telephone number and the subaddress (DSS1 only)
Subaddress	assigned to ISDN data calls for the Prestige. The maximum number of
	digits is 25 for the telephone number and 5 for the subaddress.
A/B Adapter 1 &	Enter the telephone number and the subaddress assigned to A/B
Subaddress	Adapter 1 (PHONE1).
A/B Adapter 2 &	Same as above for A/B Adapter 2 (PHONE2).
Subaddress
PABX Outside Line	Enter the number for outside line access if the Prestige is connected to
Prefix	a PABX; otherwise, leave it blank. The maximum number of digits is
	4.
Outgoing Calling	You only need to fill in this field if your switch requires a specific
Party Number	Outgoing Calling Party Number; otherwise, leave it blank.

2-18 Hardware Installation and Setup