|
| Prestige 100 and 100IH ISDN Router and Router/Hub | ||
| Table |
| ||
|
|
| ||
Field | Description | Options | ||
|
|
| ||
Telco Options: CLID | This field sets the CLID authentication parameter for all |
| ||
Authen | incoming calls. There are three options for this field: | None | ||
| • None - No CLID is required. | |||
|
| |||
| • | Required – CLID must be available, or the Prestige | Required | |
|
| |||
|
| will not answer the call. | Preferred | |
| • | Preferred - If the CLID is available then CLID will | ||
|
| |||
|
| be used; otherwise, authentication is performed in |
| |
|
| PPP negotiation. |
| |
|
|
|
| |
PPP Options: |
|
|
| |
|
|
| ||
Recv. Authen | This field sets the authentication protocol for incoming |
| ||
| calls. For security reason, setting authentication to none |
| ||
| is strongly discouraged. Options for this field are: |
| ||
| • CHAP/PAP - Your Prestige will try CHAP first, but | CHAP/PAP | ||
|
| PAP will be used if CHAP is not available. | ||
| • | CHAP – Use CHAP only. | CHAP | |
|
| |||
| • | PAP – Use PAP only. | PAP | |
|
| |||
| • | None – Your Prestige tries to acquire CHAP/PAP | None | |
|
| |||
|
| first, but no authentication is required if CHAP/PAP |
| |
|
| is not available. |
| |
|
|
|
| |
Compression | Turn on/off Stac Compression. The default for this field | On | ||
Off | ||||
| is Off. | |||
|
| |||
|
|
| ||
Mutual Authen | Some vendors, e.g., Cisco, require mutual | Yes/No | ||
| authentication, i.e., the node that initiates the call will |
| ||
| request a user name and password from the far end that |
| ||
| it is dialing to. If the remote node requires mutual |
| ||
| authentication, set this field to Yes. |
| ||
|
|
| ||
PAP Login | This field is applicable only if the Mutual Authen. Field is |
| ||
| set to Yes. Enter in the login name to be used to respond |
| ||
| to the far end’s PAP authentication request. This field |
| ||
| does not apply to CHAP authentication. |
| ||
|
|
|
| |
