ZyXEL Communications 100IH manual System Status, Menu 24.1 System Maintenance Status

Prestige 100 and 100IH ISDN Router and Router/Hub

10.1 System Status

The first selection, System Status, gives you information on the status and statistics of the ports, as shown below. System Status is a tool that can be used to monitor your Prestige. Specifically, it gives you information on your ISDN telephone line status, number of packets sent and number of packets received.

To get to the System Status, select number 24 to go to Menu 24 - System Maintenance. From this menu, select number 1, System Status. There are five commands in Menu 24.1 - System Maintenance - Status. Entering 1 disconnects the current B1 channel call; 2 disconnects the current B2 channel call, 3 resets the counters, 4 drops both B1 and B2 and ESC takes you back to the previous screen.

The table below describes the fields present in Menu 24.1 - System Maintenance - Status. It should be noted that these fields are READ-ONLY and are meant to be used for diagnostic purposes.

			Menu 24.1 -- System Maintenance – Status
Chan	Link	Type	TXPkts	RXPkts	Errors	CLU	ALU	Up Time
--	Down	0Kbps	0	0	0	0%	0%	0:00:00
--	Down	0Kbps	0	0	0	0%	0%	0:00:00

Total Outcall Time:	0:00:00
Ethernet:	WAN:
Status: 10M/Half Duplex	Chan 1 IP Addr:
TX Pkts: 230	Chan 2 IP Addr:
RX Pkts: 0	Chan 1 CLID:
Collisions: 0	Chan 2 CLID:
LAN Packet Which Triggered Last Call:
	Press Command:
COMMANDS: 1-Drop B1 2-Drop B2 3-Reset Counters 4-Drop All		ESC-Exit

Figure 10-2 Menu 24.1 - System Maintenance – Status

The following table describes the fields present in Menu 24.1 - System Maintenance - Status.

10-2 System Maintenance