ZyXEL Communications 100IH manual Command Interpreter Mode, Call Control

Models: 100IH

1 140
Download 140 pages 54.37 Kb
Page 128
Image 128

Prestige 100 and 100IH ISDN Router and Router/Hub

10.7 Command Interpreter Mode

This option allows you to enter the command interpreter mode. A list of valid commands can be found by typing [help] at the command prompt. For more detailed information, check the ZyXEL Web site or send e-mail to the ZyXEL Support Group.

 

 

 

Enter Menu Selection Number: 8

Copyright (c) 1999

ZyXEL Communications Corp.

 

ras> ?

 

 

 

 

Valid commands are:

 

 

 

sys

exit

device

ether

isdn

ip

 

ppp

 

Figure 10-13 Command mode

10.8 Call Control

The Prestige provides four call control functions: call control parameters, blacklist, budget management and call history.

Call control parameters allow you to set a dial out time limit, the number of times a number should be called before it is added to the blacklist and the interim between calls.

The budget management function allows you to set a limit on the total outgoing call time of the Prestige over a period of time. When the total outgoing call time exceeds the limit, the current call will be dropped and any future outgoing calls will be blocked.

The blacklist function prevents the Prestige from re-dialing to an unreachable phone number. It is a list of phone numbers, up to a maximum of 14, to which the Prestige will not make an outgoing call. If the Prestige tries to dial to a phone number and fails a certain number of times (configurable in Menu 24.9.1), then the phone number is put in the blacklist. You will have to enable the number manually before the Prestige will dial that number again.

Call history chronicles preceding incoming and outgoing calls.

10-16

System Maintenance

Page 128
Image 128
ZyXEL Communications 100IH manual Command Interpreter Mode, Call Control