Prestige 100 and 100IH ISDN Router and Router/Hub
Table 4-3 Remote Node PPP Options Menu Fields
Field | Description | Option |
|
|
|
Encapsulation | Select the CISCO PPP only when this remote node | Standard |
| is a Cisco machine; otherwise, select the Standard | PPP |
| PPP. | CISCO |
|
| |
|
| PPP |
|
|
|
Compression | Turn on/off Stac Compression. The default for this | On/Off |
| field is Off. | (Default = |
|
| |
|
| Off) |
|
|
|
Multiple Link Options: |
|
|
BOD Calculation | Select the direction of the traffic you wish to use in | Default = |
| determining when to add or subtract a link. The | Transmit or |
| default for this field is Transmit or Receive. | Receive |
Base Trans Rate | Select the base data transfer rate for this remote |
|
64/128 | ||
| node in Kbps. There are two choices for this field- |
|
| 64 where only one channel is used or 128 where |
|
| two channels are used as soon as a packet triggers |
|
| a call |
|
Max Trans Rate | Enter the maximum data transfer rate allowed for | 64/128 |
| this remote node. This parameter is in kilobits per |
|
| second. There are two choices for this field- same |
|
| as above. |
|
|
|
|
Target Utility (Kbps)
Add Persist
Subtract Persist
Enter the two thresholds separated by a
This parameter specifies the number of seconds where traffic is above the adding threshold before the Prestige will bring up the second link.
This parameter specifies the number of seconds where traffic is below the subtraction threshold before your Prestige drops the second link.
Default=10-
20
Default = 5
sec
Default = 5
sec
Once you have completed filling in Menu 11.2 – Remote Node PPP Options, press [Enter] at the message [Press ENTER to Confirm…] to save your configuration, or press [Esc] at any time to cancel.
Remote Node Configuration |
