Prestige 100 and 100IH ISDN Router and Router/Hub
After the initial setup, you can modify the configuration remotely through telnet connections. See Chapter 9 - Telnet Configuration and Capabilities for detailed instructions on using telnet to configure your Prestige.
2.3Additional Installation Requirements
In addition to the contents of your package, there are other hardware and software requirements you need before you can install and use your Prestige. These requirements include:
1.A computer with Ethernet
2.A computer equipped with communications software configured to the following parameters:
♦VT100 terminal emulation.
♦9600 bps (bits per second).
♦No parity, 8 Data bits, 1 Stop bit.
After the Prestige is properly set up, you can make future changes to the configuration through telnet connections.
Hardware Installation and Setup |
