Prestige 100 and 100IH ISDN Router and Router/Hub
2.9.1 General Ethernet Setup
This menu allows you to select your Ethernet interface, either 10BaseT or AUI for the Prestige 100 (only 10BaseT for the Prestige 100IH, so this field does not appear) and specify the filter sets that you wish to apply to the Ethernet traffic. You seldom need to filter Ethernet traffic, however, the filter sets may be useful to block certain packets, reduce traffic and prevent security breaches.
Menu 3.1 - General Ethernet Setup
Ethernet Interface= 10BaseT
Input Filter Sets: protocol filters= 2
device filters= Output Filter Sets: protocol filters= device filters=
Press ENTER to Confirm or ESC to Cancel:
Figure 2-17 Menu 3.1 - General Ethernet Setup
If you need to define filters, please read Chapter 8- Filter Set Configuration, then return to this menu to define the filter sets.
2.10 Protocol Dependent Ethernet Setup
For TCP/IP Ethernet setup refer to Chapter 3 - Internet Access Application.
Hardware Installation and Setup |
