ZyXEL Communications 100IH manual Navigating the SMT Interface, Main Menu Commands

Prestige 100 and 100IH ISDN Router and Router/Hub

2.5Navigating the SMT Interface

The SMT (System Management Terminal) is the interface that you use to configure your Prestige.

Several operations that you should be familiar with before you attempt to modify the configuration are listed in the table below.

Table 2-3 Main Menu Commands

Operation	Press/<read>	Description
Move forward to	[Enter]	To move forward to a sub-menu, type in the number of the desired
another menu		sub-menu and press [Enter].
Move backward to	[Esc]	Press the [Esc] key to move back to the previous menu.
a previous menu
Move the cursor	[Enter] or	Within a menu, press [Enter] to move to the next field. You can also
		use the [Up]/[Down] arrow keys to move to the previous and the next
	[Up]/[Down]
		field, respectively.
	arrow keys
Enter information	Fill in, or	You need to fill in two types of fields. The first requires you to type in
	Press the	the appropriate information. The second allows you to cycle through
		the available choices by pressing the [Space] bar.
	[Space bar] to
	toggle
Required fields	<?>	All fields with the symbol <?> must be filled in order be able to save
		the new configuration.
N/A fields	<N/A>	Some of the fields in the SMT will show a <N/A>. This symbol refers
		to an option that is Not Applicable.
Save your	[Enter]	Save your configuration by pressing [Enter] at the message [Press
		ENTER to confirm or ESC to cancel]. Saving the data on the screen
configuration
		will take you, in most cases to the previous menu.
Exit the SMT	Type 99, then	Type 99 at the Main Menu prompt and press [Enter] to exit the SMT
	press [Enter].	interface.

2-8 Hardware Installation and Setup