ZyXEL Communications 100IH manual NI-1 Default Feature Key Settings, None

Prestige 100 and 100IH ISDN Router and Router/Hub

The Advanced Phone Services chapter in this manual describes these services in more detail. There may be an additional charge for each of these services, so just choose the services you need. The phone company representative will ask you for the Feature Keys (buttons) for any Voice Features that you have chosen to activate. The Default Feature Keys for the Prestige series are as follows:

Table 2-8 NI-1 Default Feature Key Settings

Feature	Default Feature Key
3-Way Calling (Conference)	60
Call Transfer	61
Call Drop	62
Call Forwarding	57

If your phone company can not support these default Feature Key settings, ask the phone company representative to provide you with settings which are within their support range, select Yes in the Advanced Setup field in menu 2 above and change the settings in Menu 2.1, the screen shown below.

Menu 2.1 - ISDN Advanced Setup

ISDN Features Access Code:

Conference Call= 60

Call Transfer= 61

Call Drop= 62

Call Forwarding= 57

Phone 1 Call Waiting= Enable

Phone 2 Call Waiting= Enable

First Data Call= None

Figure 2-11 Menu 2.1 ISDN Advanced Setup

		Table 2-9 Menu 2.1 fields
Call	Enable allows you to place a call on hold while you answer
Waiting	another incoming call on the same telephone (directory)
	number.
First Data	Preference of the ISDN setup message for the first data call.
Call	None	1st phone number, no B-channel preference.
	1st	1st phone number, B1 channel preference
	2nd	2nd phone number, B2 channel preference

Hardware Installation and Setup 2-15