|
| ZyWALL 5/35/70 Series User’s Guide |
| Table 29 Bridge Port Roles (continued) | |
|
|
|
| LABEL | DESCRIPTION |
|
|
|
| WLAN | When you have the wireless card set to WLAN, you can select a port’s WLAN |
|
| radio button to use the port as part of the WLAN. |
|
| The port will use the ZyWALL’s WLAN IP address and the MAC address of the |
|
| WLAN card. |
|
| Note: You must install a wireless card to use the WLAN port role. |
|
| See Appendix A on page 664 for how to install a WLAN card. |
| Wireless Card | Select LAN to use the wireless card as part of the LAN. |
|
| Select DMZ to use the wireless card as part of the DMZ. |
|
| Select WLAN to use the wireless card as part of the WLAN. |
|
| The ZyWALL restarts after you change the wireless card setting. |
|
| Note: If you set the wireless card to be part of the LAN or DMZ, you |
|
| can still use wireless access, but not the WLAN interface in |
|
| the firewall. The firewall will treat the wireless card as part of |
|
| the LAN or DMZ respectively. |
| Apply | Click Apply to save your changes back to the ZyWALL. |
|
|
|
| Reset | Click Reset to begin configuring this screen afresh. |
|
|
|
After you change the LAN/DMZ/WLAN port roles and click Apply, please wait for few seconds until the following screen appears. Click Return to go back to the Port Roles screen.
Figure 46 Port Roles Change Complete
Chapter 6 Bridge Screens | 128 |