ZyWALL 5/35/70 Series User’s Guide

31.11.3 Back to Factory Defaults

Pressing the Reset button in this section clears all user-entered configuration information and returns the ZyWALL to its factory defaults as shown on the screen. The following warning screen will appear.

Figure 261 Reset Warning Message

You can also press the RESET button on the rear panel to reset the factory defaults of your ZyWALL. Refer to Section 2.3 on page 67 for more information on the RESET button.

31.12 Restart Screen

System restart allows you to reboot the ZyWALL without turning the power off.

Click MAINTENANCE, and then Restart. Click Restart to have the ZyWALL reboot. This does not affect the ZyWALL's configuration.

Figure 262 Restart Screen

499

Chapter 31 Maintenance