ZyWALL 5/35/70 Series User’s Guide

If you allow your ZyWALL to be managed by the Vantage CNM server, then you should not do any configurations directly to the ZyWALL (using either the web configurator, SMT menus or commands) without notifying the Vantage CNM administrator.

27.17 Configuring CNM

Vantage CNM is disabled on the device by default. Click ADVANCED, REMOTE MGMT in the navigation panel and then click the CNM tab to configure your device’s Vantage CNM settings.

Figure 229 CNM

The following table describes the labels in this screen.

Table 160 CNM

LABEL

DESCRIPTION

 

 

Registration

 

Information

 

Registration Status

This read only field displays Not Registered when Enable is not selected.

 

It displays Registering when the ZyWALL first connects with the Vantage

 

CNM server and then Registered after it has been successfully registered

 

with the Vantage CNM server. It will continue to display Registering until it

 

successfully registers with the Vantage CNM server. It will not be able to

 

register with the Vantage CNM server if:

 

• The Vantage CNM server is down.

 

• The Vantage CNM server IP address is incorrect.

 

• The Vantage CNM server is behind a NAT router or firewall that does not

 

forward packets through to the Vantage CNM server.

 

• The encryption algorithms and/or encryption keys do not match between

 

the ZyWALL and the Vantage CNM server.

453

Chapter 27 Remote Management