|
| ZyWALL 5/35/70 Series User’s Guide |
| Table 16 VPN Wizard : Network Setting | |
|
|
|
| LABEL | DESCRIPTION |
|
|
|
| Remote | Remote IP addresses must be static and correspond to the remote IPSec router's |
| Network | configured local IP addresses. |
|
| Select Single for a single IP address. Select Range IP for a specific range of IP |
|
| addresses. Select Subnet to specify IP addresses on a network by their subnet mask. |
| Starting IP | When the Remote Network field is configured to Single, enter a (static) IP address |
| Address | on the network behind the remote IPSec router. When the Remote Network field is |
|
| configured to Range IP, enter the beginning (static) IP address, in a range of |
|
| computers on the network behind the remote IPSec router. When the Remote |
|
| Network field is configured to Subnet, enter a (static) IP address on the network |
|
| behind the remote IPSec router |
| Ending IP | When the Remote Network field is configured to Single, this field is N/A. When the |
| Address/ | Remote Network field is configured to Range IP, enter the end (static) IP address, in |
| Subnet Mask | a range of computers on the network behind the remote IPSec router. When the |
|
| Remote Network field is configured to Subnet, enter a subnet mask on the network |
|
| behind the remote IPSec router. |
| Back | Click Back to return to the previous screen. |
|
|
|
| Next | Click Next to continue. |
|
|
|
3.5 VPN Wizard IKE Tunnel Setting (IKE Phase 1)
Figure 28 VPN Wizard: IKE Tunnel Setting
Chapter 3 Wizard Setup | 96 |