ZyWALL 5/35/70 Series User’s Guide
Figure 284 Menu 3.2: TCP/IP and DHCP Ethernet Setup
Menu 3.2 - TCP/IP and DHCP Ethernet Setup
DHCP= Server | TCP/IP Setup: |
Client IP Pool: | IP Address= 192.168.1.1 |
Starting Address= 192.168.1.33 | |
Size of Client IP Pool= 128 | IP Subnet Mask= 255.255.255.0 |
| RIP Direction= Both |
| Version= |
| Multicast= None |
| Edit IP Alias= No |
DHCP Server Address= N/A |
|
Press ENTER to Confirm or ESC to Cancel:
Follow the instructions in the next table on how to configure the DHCP fields.
Table 197 Menu 3.2: DHCP Ethernet Setup Fields
FIELD | DESCRIPTION |
|
|
DHCP | This field enables/disables the DHCP server. |
| If set to Server, your ZyWALL will act as a DHCP server. |
| If set to None, the DHCP server will be disabled. |
| If set to Relay, the ZyWALL acts as a surrogate DHCP server and relays requests |
| and responses between the remote server and the clients. |
| When set to Server, the following items need to be set: |
|
|
Client IP Pool: |
|
|
|
Starting Address | This field specifies the first of the contiguous addresses in the IP address pool. |
|
|
Size of Client IP | This field specifies the size, or count of the IP address pool. |
Pool |
|
Chapter 35 LAN Setup | 528 |