ZyWALL 5/35/70 Series User’s Guide

The following pages show a typical configuration that builds a tunnel between two private networks. One network is the headquarters (HQ) and the other is a branch office. Both sites have static (fixed) public addresses. Replace the Remote Gateway Address and Local/ Remote Starting IP Address settings with your own values.

VPN Configuration

This section gives a VPN rule configuration example using the web configurator.

1 Click VPN to display the following screen. Click the add gateway policy (

) icon to

add an IPSec rule (or gateway policy).

 

Figure 463 VPN Rules

 

 

 

2Configure the screens in the headquarters and the branch office as follows and click Apply.

The pre-shared key must be exactly the same on both IPSec routers. Use a simple key and/or copy and paste the setting into the other IPSec router to avoid typos.

731

Appendix K VPN Setup