ZyWALL 5/35/70 Series User’s Guide

Table 39 WAN: Ethernet Encapsulation (continued)

LABEL

DESCRIPTION

 

 

Retype to Confirm

Type your password again to make sure that you have entered is correctly.

 

 

Login Server IP

Type the authentication server IP address here if your ISP gave you one.

Address

This field is not available for Telia Login.

 

 

 

Login Server

Type the domain name of the Telia login server, for example login1.telia.com.

(Telia Login only)

 

Relogin

The Telia server logs the ZyWALL out if the ZyWALL does not log in periodically.

Every(min)

Type the number of minutes from 1 to 59 (30 default) for the ZyWALL to wait

(Telia Login only)

between logins.

WAN IP Address

 

Assignment

 

Get automatically

Select this option If your ISP did not assign you a fixed IP address. This is the

from ISP

default selection.

Use Fixed IP

Select this option If the ISP assigned a fixed IP address.

Address

 

My WAN IP

Enter your WAN IP address in this field if you selected Use Fixed IP Address.

Address

 

My WAN IP

Enter the IP subnet mask (if your ISP gave you one) in this field if you selected Use

Subnet Mask

Fixed IP Address.

Gateway IP

Enter the gateway IP address (if your ISP gave you one) in this field if you selected

Address

Use Fixed IP Address.

Advanced Setup

 

 

 

Enable NAT

Network Address Translation (NAT) allows the translation of an Internet protocol

(Network Address

address used within one network (for example a private IP address used in a local

Translation)

network) to a different IP address known within another network (for example a

 

public IP address used on the Internet).

 

Select this check box to enable NAT.

 

 

RIP Direction

RIP (Routing Information Protocol) allows a router to exchange routing information

 

with other routers. The RIP Direction field controls the sending and receiving of

 

RIP packets.

 

Choose Both, None, In Only or Out Only.

 

When set to Both or Out Only, the ZyWALL will broadcast its routing table

 

periodically.

 

When set to Both or In Only, the ZyWALL will incorporate RIP information that it

 

receives.

 

When set to None, the ZyWALL will not send any RIP packets and will ignore any

 

RIP packets received.

 

By default, RIP Direction is set to Both.

 

 

145

Chapter 7 WAN Screens