|
| ZyWALL 5/35/70 Series User’s Guide |
| Table 160 CNM (continued) | |
|
|
|
| LABEL | DESCRIPTION |
|
|
|
| Last Registration Time | This field displays the last date |
|
| seconds) that the ZyWALL registered with the Vantage CNM server. It |
|
| displays all zeroes if it has not yet registered with the Vantage CNM server. |
| Refresh | Click Refresh to update the registration status and last registration time. |
|
|
|
| Vantage CNM Setup |
|
|
|
|
| Enable | Select this check box to allow Vantage CNM to manage your ZyWALL. |
|
|
|
| Vantage CNM Server | If the Vantage server is on the same subnet as the ZyXEL device, enter the |
| Address | private or public IP address of the Vantage server. |
|
| If the Vantage CNM server is on a different subnet to the ZyWALL, enter the |
|
| public IP address of the Vantage server. |
|
| If the Vantage CNM server is on a different subnet to the ZyWALL and is |
|
| behind a NAT router, enter the WAN IP address of the NAT router here and |
|
| configure the NAT router to forward UDP port 1864 traffic to the Vantage CNM |
|
| server. |
|
| If the Vantage CNM server is behind a firewall, you may have to create a rule |
|
| on the firewall to allow UDP port 1864 traffic through to the Vantage CNM |
|
| server (most (new) ZyXEL firewalls automatically allow this). |
| Encryption Algorithm | The Encryption Algorithm field is used to encrypt communications between |
|
| the ZyWALL and the Vantage CNM server. Choose from None (no |
|
| encryption), DES or 3DES. The Encryption Key field appears when you |
|
| select DES or 3DES. The ZyWALL must use the same encryption algorithm as |
|
| the Vantage CNM server. |
| Encryption Key | Type eight alphanumeric characters ("0" to "9", "a" to "z" or "A" to "Z") when |
|
| you choose the DES encryption algorithm and 24 alphanumeric characters |
|
| ("0" to "9", "a" to "z" or "A" to "Z") when you choose the 3DES encryption |
|
| algorithm. The ZyWALL must use the same encryption key as the Vantage |
|
| CNM server. |
| Apply | Click Apply to save your changes back to the ZyWALL. |
|
|
|
| Reset | Click Reset to begin configuring this screen afresh. |
|
|
|
Chapter 27 Remote Management | 454 |