ZyWALL 5/35/70 Series User’s Guide
The following table describes the labels in this screen.
Table 134 Policy Route Summary
LABEL | DESCRIPTION |
|
|
# | This is the number of an individual policy route. |
|
|
Active | This field shows whether the policy is active or inactive. |
|
|
Source Address/ | This is the source IP address range and/or port number range. |
Port |
|
Destination | This is the destination IP address range and/or port number range. |
Address/Port |
|
Gateway | Enter the IP address of the gateway. The gateway is a router or switch on the same |
| network segment as the device's LAN or WAN port. The gateway helps forward |
| packets to their destinations. |
Protocol | This is the IP protocol and can be ALL(0), ICMP(1), IGMP(2), TCP(6), UDP(17), |
| GRE(47), ESP(50) or AH(51). |
Action | This field specifies whether action should be taken on criteria Matched or Not |
| Matched. |
Modify | Click the edit icon to go to the screen where you can edit the routing policy on the |
| ZyWALL. |
| Click the delete icon to remove an existing routing policy from the ZyWALL. A |
| window display asking you to confirm that you want to delete the routing policy. |
Move | Type a policy route's index number and the number for where you want to put that |
| rule. Click Move to move the rule to the number that you typed. |
| The ordering of your rules is important as they are applied in order of their |
| numbering. |
24.5 Policy Route Edit
Click POLICY ROUTE to open the Policy Route Summary screen. Then click the edit icon to open the Edit IP Policy Route screen.
Chapter 24 Policy Route | 398 |