Chapter 2 Hardware Installation and Connections
Figure 8 IES-6000M Airflow
Use the following procedure to install the main chassis in the rack.
Note: Install the main chassis and splitter chassis in a rack with the splitter chassis directly below the main chassis.
Note: For the IES-5106M, If you are using 72-port line cards, use two IES-5005ST splitter chassis. If you are using 48-port line cards, use one IES-5005ST splitter chassis and one IES-5002ST splitter chassis.
Note: For the IES-5112M, If you are using 72-port line cards, use two IES-5000ST splitter chassis. If you are using 48-port line cards, use one IES-5000ST splitter chassis and one IES-5002ST splitter chassis.
Note: For the IES-6000M, if you are using a single management card in the main chassis, install the IES-3016ST splitter chassis (which provides 16 splitter or extension card slots). If you are using two management cards in the main chassis, install the IES-3000ST splitter chassis (which provides 15 splitter or extension card slots).
1Position a mounting bracket on one side of the chassis, making sure the screw holes on the bracket are on the same side as the front panel of the main chassis.
2Use the screwdriver to install the screws through the mounting bracket holes into the main chassis.
| 21 |
IES-5106M / IES-5112M / IES-6000M User’s Guide |
| |
